Aluminum Angle (L Profiles) — Manufacturer & Supplier
Equal & unequal leg angles in 6061-T6 (struktural) dan 6063-T5/T6 (arsitektur). Ukuran kaki 10–150 mm, ketebalan 00,8–12 mm, panjang stok 6,0/6,1 m dan potongan khusus sesuai ukuran. Hasil akhir yang digiling, dianodisasi, atau dilapisi bubuk. EN 10204 3.1 MTC berdasarkan permintaan.
Penawaran 24 jam • Diskon Massal • Pemotongan Khusus
Sorotan Utama
Struktural atau Arsitektur
6061-T6 untuk kekuatan lebih tinggi; 6063-T5/T6 untuk permukaan halus dan anodisasi premium.
Equal & Unequal Legs
Kaki 10–150 mm; ketebalan 0,8–12 mm; radius sudut/ketajaman per kelas cetakan dan target akhir.
Opsi Penyelesaian
Mill, clear/black/bronze anodized (e.g., 8–25 μm), powder coated (RAL), brushed; PE protective film.
Specifications & Range
1) Standard Supply Range
| Parameter | Capability | Catatan |
|---|---|---|
| Leg Size (A×B) | 10–150 mm (equal & unequal) | Larger by special run |
| Thickness (t) | 00,8–12 mm | Heavier on inquiry |
| Panjang | 2–12 m (stock 6.0/6.1 m) | Cut-to-size & miter |
| Paduan | 6061-T6/T6511, 6063-T5/T6 | Others: 6005A/6082/5052 |
| Selesai | Mill, anodized, powder coat | Brushed, film-laminated |
| dokumen | EN 10204 3.1 MTC | RoHS/REACH available |
2) Example Stock Size Matrix
| Jenis | Grade / Temper | Legs (mm) | Ketebalan (mm) | Panjang |
|---|---|---|---|---|
| Equal | 6061-T6 | 25×25 • 30×30 • 40×40 • 50×50 • 75×75 | 3 / 4 / 5 / 6 | 6,0/6,1 m |
| Equal | 6063-T5 | 15×15 • 20×20 • 25×25 • 30×30 | 1.5 / 2 / 3 | 6,0/6,1 m |
| Unequal | 6061-T6 | 40×20 • 60×40 • 75×50 • 100×50 | 3 / 4 / 5 / 6 / 8 | 6,0/6,1 m |
| Architectural | 6063-T6 (Anodize) | 20×20 • 25×25 • 30×30 • 40×20 | 1.5 / 2 / 3 | Cut-to-size |
3) Standards & Tolerances
- • ASTM B221 (extruded bars, rods, wire, profiles) and EN 755-2/-9 (mechanical properties & tolerances)
- • GB/T 6892 (China) for extruded profiles
- • Straightness, twist, leg length, thickness and corner radius per order standard and die class
4) Weight per Meter (Quick Reference)
Formula (mm): kg/m = 0.0027 × t × (A + B − t), where A and B are leg sizes and t is thickness.
| Size (A×B×t, mm) | Calculated kg/m | Catatan |
|---|---|---|
| 25×25×3 | 0.381 | Equal leg, light duty |
| 40×40×4 | 0.821 | Fabrikasi Umum |
| 50×50×5 | 1.283 | Structural frames |
| 60×40×6 | 1.523 | Unequal leg |
| 75×75×6 | 2.333 | Heavier duty |
Weights are theoretical; confirm with MTC for each lot.
Aplikasi
Frames & Racks
Machine frames, brackets, guards, shelving and fixtures.
Vehicles & Trailers
Toolboxes, body frames, decks and ramps (6061-T6).
Laut
Handrails, ladders, platforms—anodized for durability.
Konstruksi
Window/door trim, reveals, cladding edges (6063-T5/T6).
Electrical & HVAC
Cable trays, duct bracing, supports and fixtures.
Fabrikasi Umum
Jigs, tables, exhibits and guards with clean esthetics.
6061 vs 6063 — Quick Selection Guide
6061-T6 (Structural)
- • Higher strength & good machinability
- • Excellent weldability; re-heat treat if critical strength in HAZ
- • Common for trailers, frames, fixtures, machine bases
6063-T5/T6 (Architectural)
- • Smoother surface, tighter cosmetic control
- • Best anodizing response (clear/black/bronze)
- • Ideal for trims, glazing, displays and interiors
FAQ
1) 6061 vs 6063 — which should I choose?
Choose 6061-T6 for strength-critical frames and trailers; choose 6063-T5/T6 for architectural looks and anodizing quality.
2) Can you supply unequal angles?
Yes—e.g., 60×40×6, 75×50×5, 100×50×6. Share your list and we’ll match die availability or run custom.
3) Are corners sharp or rounded?
6063 architectural angles are typically sharper; 6061 structural angles may have a slight outside radius and tapered legs depending on the die.
4) What lengths do you stock?
Common stock is 6.0/6.1 m. We cut to any length and offer precision 45° mitered corners for frames.
5) What finishes are available?
Gilingan, bening/hitam/perunggu anodisasi (8–25 μm), dilapisi bubuk (RAL), disikat; film pelindung untuk kosmetik.
6) Bisakah Anda melakukan pra-pengeboran dan deburr?
Ya—Pengeboran/slotting CNC, countersink, penyadapan, ditambah deburr dan pengepakan kit dengan label.
7) Standar/toleransi apa yang berlaku?
ASTM B221 / EN 755-2 (mekanis) / EN 755-9 (toleransi). Kelurusan, putaran, panjang kaki, ketebalan per standar dan kelas cetakan.
8) Bagaimana cara memilih ketebalan untuk suatu bentang?
Menyediakan jarak bentang, muatan, dan penyangga—kami akan melakukan pemeriksaan cepat dan merekomendasikan ukuran/kemiringan sudut serta penyelesaian akhir.
9) Apa MOQ dan waktu tunggu?
Ukuran stok dikirimkan dengan cepat; ukuran/penyelesaian khusus biasanya memakan waktu 2–4 minggu. MOQ bergantung pada ukuran dan hasil akhir—seringkali 500–1000 kg per spesifikasi.
10) Do you provide test certificates?
Yes—EN 10204 3.1 MTC with chemistry and mechanicals; anodize/powder coating certificates upon request.
