Q235 Galvanized Steel Pipe/Tube
Q235 galvanized steel pipes are high-strength, corrosion-resistant pipes made from Q235 carbon steel, a low-carbon structural steel with a yield strength of ~235 MPa. The galvanization process involves coating the steel with a protective layer of zinc via hot-dip galvanizing, which creates a durable alloy layer (typically 35–200 μm thick) that prevents rust and extends lifespan.
Gengfei Steel is an experienced steel supplier, providing the best prices and services.
- Description
- Reviews (0)
Description
What is the Q235 Galvanized Steel Pipes?
Q235 steel is a plain carbon structural steel in the Chinese standard GB/T 700. The “Q” stands for “yield point,” and “235” indicates its minimum yield strength of 235 MPa. It’s classified into four quality grades: Q235A, Q235B, Q235C, and Q235D, primarily differing in their impact toughness and deoxidation methods.
When Q235 steel is “galvanized,” it means a protective layer of zinc has been applied to its surface. This is typically done through two main methods:
- Hot-dip galvanizing: The steel pipe is immersed in a bath of molten zinc. This creates a thick, uniform zinc coating that bonds metallurgically with the steel, offering superior corrosion protection, especially for outdoor and harsh environments. The entire part, including edges and welds, is covered.
- Pre-galvanizing (or mill galvanizing): The steel coil is galvanized before being formed into a pipe. This results in a thinner but often more aesthetically pleasing zinc coating. It’s suitable for applications where a high degree of corrosion resistance isn’t the primary concern, or where appearance is important.
The zinc layer acts as a sacrificial anode, meaning it corrodes before the underlying steel, providing excellent long-term protection against rust and oxidation.
Technical Parameters of Q235 GI Pipe
| Parameter | Specification |
|---|---|
| Steel Grade | Q235 |
| Outer Diameter | 15–219 mm (customizable) |
| Wall Thickness | 1.0–12 mm (customizable) |
| Zinc Coating Thickness | 40–600 g/m² |
| Length | 5.8 m / 6 m / 12 m or custom |
| Standard | GB/T 3091, BS1387, ASTM A53 equivalent |
| Surface | Hot-dip galvanized |
| Ends | Plain / beveled / threaded |
Advantages of Q235 Galvanized Pipe
Applications of Q235 Galvanized Steel Tube
How to Choose the Right Galvanized Pipe/Tubes
When selecting galvanized pipes for your project:
-
🔍 For light structural and low-pressure needs → Choose Q195
-
🏗️ For general construction use → Choose Q235
-
🏢 For heavy-duty, high-strength applications → Choose Q345
Comparison Table: Q235 vs Other Galvanized Steel Pipes
| Feature | Q195 Galvanized Pipe | Q215 Galvanized Pipe | Q235 Galvanized Pipe | Q345 Galvanized Pipe |
|---|---|---|---|---|
| Tensile Strength | 315–430 MPa | 315–430 MPa | 375–500 MPa | 470–630 MPa |
| Yield Strength | ≥195 MPa | ≥215 MPa | ≥235 MPa | ≥345 MPa |
| Plasticity | High | Medium-High | Medium | Lower |
| Strength | Low | Medium | Medium-High | High |
| Weldability | Excellent | Excellent | Good | Moderate |
| Cost | Lowest | Low | Moderate | Higher |
| Application Suitability | Light structures | Medium-load structures | Structural, pressure pipe | Heavy-load structures |
Be the first to review “Q235 Galvanized Steel Pipe/Tube”
📧 Email: [email protected]
📞 WhatsApp / Phone: +86 191 3986 3252
🌐 Website: www.gengfeisteel.com
Reviews
There are no reviews yet.